Ocena wątku:
  • 0 głosów - średnia: 0
  • 1
  • 2
  • 3
  • 4
  • 5
wholesale Flanges By Material Grades
19.06.2018, 09:10,
Post: #1
wholesale Flanges By Material Grades
Carbon Steel Flanges
Carbon steel flange, that is, the main material is carbon steel flange or end flange connectors. It contains carbon steel flange, known as carbon steel flange.
Carbon Steel Flanges are designed with care using current techniques under the visionary guidance of accomplished professionals at manufacturing unit. Offered range is stringently tested on various parameters of quality for ensuring flawlessness and defect free. These products are widely used in various industries and widely appreciated by clients for owning unmatchable characteristics. Offered range supplied in quality assured packaging material.
ASTM A694
The standards of A694 are more rigorous than the more common SA105N and SA350LF2 grades, providing more robust specifications for high-pressure fluid transmission in oil and gas piping systems. The increased demands on the physical properties of the steel create a stronger metal throughout the pressure range, from low to high temperature services.
Each grade in the A694 specification is assigned a number correlating to the minimum yield strength (in ksi units) required for that grade; GradeF52 for example requires a minimum Yield Strength of 52 ksi.
SA105N
This is a mild Carbon Steel that is not only one of the most common of the Carbon steels, but also one of the most common steels in the world. It is hard, not brittle or ductile, and has a low price point. SA105N is very common throughout many industries, and is even used with stainless Steel piping systems with the aid oflap joint End Rings
We stock large diameter (18” – 42”) SLIP-ON, Lap Joint, Weld Neck, and Blind Flanges in SA105N, in class 150 and 300, and can also source a variety of sizes and classes for longer lead times, from 12” to 60”.
SA350 LF2
This is a grade of Carbon Steel intended primarily for low-temperature service and requires notch toughness testing. Very similar to SA105N, this material is used in more industrial applications such as the oil and gas industries.
Chemical composition
C 0.3
Mn 0.6~1.35
P 0.035
S 0.04
Si 0.15~0.3
Ni 0.40
Mo 0.12
Cr 0.30
V 0.08
Mechanical properties
Tensile Strength, ksi [MPa] 70-95 [485-655]
Yield Strength, Min., ksi [MPa] 36 [250]
Elongation - 2 in. [50mm] / 4D, Min., % 30 / 22
Reduction of Area, Min., % 40.00
Brinell Hardness, max 187
We can supply large diameter Flanges of all types in SA350LF2, from 18” to 60”, in a wide variety of pressure classes.
The A350 LF2 Line is often referred to as Carbon Steel Low Temp Fittings or Flanges
We carry a large inventory of Carbon Steel Flanges in many types and sizes.
Grades of Carbon steel flanges:
We shall be pleased to develop Non-Standard
· ASTM A105, ASTM A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2
· ASTM A694 F42, F46, F48, F50, F52, F56, F60, F65, F70
Carbon Steel Forged Flanges
A flange is defined as a plate type device, normally round, that is attached to the end of a pipe, fitting, valve or other object to facilitate the assembly and disassembly of a piping system.
Flanges are manufactured in all the different materials to match the material of the pipe and fittings to which they are being attached. While some flanges are made of Cast Iron, the vast majority of flanges are forged carbon steel.
Forged steel flanges are made in seven primary ratings: Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500 & Class 2500-
Chemical Composition of ASTM A694
ASTM A694 Standard covers carbon and alloy steel forgings for pipe flanges, fittings, valves, and parts for high-pressure transmission service.
Grade C Mn P S Si
ASTM A694 F42 0.26-0.265 1.60-1.64 0.025-0.030 0.025-0.030 0.15-0.35
ASTM A694 F52 0.26-0.265 1.60-1.64 0.025-0.030 0.025-0.030 0.15-0.35
ASTM A694 F60 0.26-0.265 1.60-1.64 0.025-0.030 0.025-0.030 0.15-0.35
ASTM A694 F65 0.26-0.265 1.60-1.64 0.025-0.030 0.025-0.030 0.15-0.35
Tensile Requirements
Combining values from the two systems may result in nonconformance with the standard.
Grade Yield Strength (0.2 % Offset), min, ksi [MPa] Tensile Strength
min, ksi [MPa] Elongation in 2 in. or 50 mm, min %
F42 42 [290] 60 [415] 20
F46 46 [315] 60 [415] 20
F48 48 [330] 62 [425] 20
F50 50 [345] 64 [440] 20
F52 52 [360] 66 [455] 20
F56 56 [385] 68 [470] 20
F60 60 [415] 75 [515] 20
F65 65 [450] 77 [530] 20
F70 70 [485] 82 [565] 18
Carbon Steel Flange Types
Carbon Steel Flanges are corrosion resistant and have a wide variety of uses. We carry variety of threaded flanges, weld neck flanges and slip on flanges and of course we can can custom build Carbon Steel Flanges to your specifications.
TYPES OF FLANGES
The most used flange types in Petro and chemical industry are:
· Welding Neck Flanges
· Slip-On Flanges
· Socket Welding Flanges
· Lap Joint Flanges
· Threaded Flanges
· Blind Flanges, Figure-8 Blanks
SPECIAL FLANGES
Except the most used standard flanges, there are still a number of special flanges such as:
· Orifice Flanges
· Expander Flange
· Spectacle Blind Flange
· Reducing Flange
· Weldoflange / Nipoflange
Custom Carbon Steel Flanges
Carbon Steel Flanges are corrosion resistant and have a wide variety of uses. We carry a variety of threaded flanges, weld neck flanges and slip- on flanges and, of course, we can can custom build steel flanges to your specifications.
Carbon Steel Flanges Finished
Natural, Nickel Plated, Electro Polished Plated or any coating as per customer specification.
Any kind of special die casting sand gravity die lost wax shell moulding castings and cast parts casting produced to user specifications. We can be more competitive than Chinese castings and cast parts made in China Taiwan Asia Korea as traditional Indian expertise in Brass castings and Brass casting is superior and Indian Carbon Steel foundry / foundries are more competitive than other S.S. Carbon Steel wholesale Flanges By Material Grades
website:http://www.matech-steel.com/flanges/flanges-by-material-grades/
Odpowiedz


Skocz do:


Użytkownicy przeglądający ten wątek: 1 gości